World has become technologically advanced and with that all household consumer electronics are changing their shapes and looks. Televisions, of course, have changed their shape dramatically. If you can remember the old CRT televisions, you would know the difference. Those devices were bulky, heavy and, frankly, a little ugly. But now, we have sleek and elegant looking televisions that will take only a couple inches of width from your space. With these improvements, now we have the ability to place these devices anywhere we want. You can place them on a small stand, on a wall or even on a ceiling! This is possible because they are surprisingly light weight and they look good no matter where you fix them. So if you have replaced you old CRT with a new LCD, now it is time to fix it on your wall. But it is not as easy as it sounds, of course. Before starting a TV wall mounting Perth process, you have to focus on overcoming some common obstacles. First, you have to figure out the locations of wall studs. This can be a tricky job. So if you are doing this all by yourself, get a good and properly calibrated stud finder. Most of the time these devices fail to identify exact locations of studs and you will end with bad results.
So calibrate it first and trust your instincts. Sometimes people end up finding nothing and when they try to nice fix the wall bracket, holes interfere with a wall bracket. If you want to avoid this, put some effort in to scanning your wall thoroughly. Once you have found an ideal spot, you can make the holes on wall and before finalizing them, make sure they match with your wall bracket. If they don’t match, you don’t have to panic. You can simply make an extra hole on the bracket and save the day. However, try not to fix it above your fireplace because electronics and heat never go well.
Once you have drilled holes on the wall, you can attach the bracket with studs or with bolts. Before tightening them make sure it is properly aligned and leveled. Once you ensure that the bracket is properly leveled, tighten the screws properly because these bolts will carry the total weight of your television. After that you can finalize your TV installation by fixing the television to the bracket.Also, focus on keeping it clean. Don’t let wires hang around your television. Try to put them inside the wall and you can use in-wall power extensions as well. If you think it can be a hassle, you can always hire a professional!